Cd-Rom Drive - IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual

CD-ROM drive

Before you begin:
v Read "Safety information" on page 129
v Review the information in "System reliability considerations" on page 33
To remove the CD-ROM drive, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server and disconnect the power cord; then, disconnect all external
3. Remove the side cover. See "Removing the side cover" on page 36
4. Disconnect the CD-ROM connector and power cables.
5. Remove the two screws from the CD-ROM drive cage.
6. Gently slide the CD-ROM drive toward the front of the server and lift it out.
For instructions to replace the CD-ROM drive, see "Installing a 5.25-inch
removable-media drive" on page 51
94
IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide
cables.