IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual page 94

8. Gently pry the fan away from the adapter-support bracket and lift it up and out.
To install the new front fan assembly, complete the following steps:
1. Place the fan in position on the adapter-support bracket.
2. Guide the rubber extensions through the apertures.
3. Use needle-nosed pliers to pull the extensions through the apertures.
4. Reconnect cables.
5. Replace the frame-support bracket.
6. Replace the side cover.
84
IBM xSeries 225 Types 8649: Hardware Maintenance Manual and Troubleshooting Guide
Rubber
extensions