IBM 8649 - Eserver xSeries 225 Maintenance And Troubleshooting Manual page 121

Note: See "System replaceable units" on page 122 to determine which components should be replaced by a field
service technician.
Error code/symptom
162
(Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration.
163
(Real-time clock error)
164
(Memory configuration changed.)
175
(EEPROM CRC #1 damaged.)
184
(Power-on password damaged)
185
(Drive startup sequence information
corrupted)
187
(VPD serial number not set.)
188
(EEPROM CRC #2 damaged.)
189
(An attempt made to enter the system with
invalid passwords)
201
(Memory test error.)
229
(Internal cache (L2) error)
289
(DIMM disabled by the user or system.)
301
(Keyboard or keyboard controller error)
303
(Keyboard controller error)
602
(Invalid diskette boot record)
FRU/action
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
System board
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Set serial number in the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. Run the Configuration/Setup Utility program.
2. System board.
1. DIMM
2. System board
1. Microprocessor
2. Optional microprocessor
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
1. Keyboard
2. System board
1. Replace the PS/2 keyboard with a USB keyboard.
2. System board.
1. Diskette
2. Diskette drive
3. Drive cable
4. System board
Chapter 6. Symptom-to-FRU index
111