Memory Board - Intel S7000FC4UR - Server System - 0 MB RAM Product Manual

Video Support
The main board uses the ATI* RN50 Embedded Video Controller with 32 MB of video
RAM. The RN50 provides these features:
•
2D/3D video accelerator
•
Dual DAC for simultaneous port support (front / rear video support)
•
Resolutions from VGA up to UXGA (1600 x 1200)
•
Digital Video Input/Output (DVI/DVO) interface routed to the Intel
Management Module 2 (Intel
•
3.3 V 32-bit / 33 MHz PCI host interface
The main board has a standard DB5 video connector.
Ethernet Support
1000/100/10 Ethernet capability is supported by the ESB2 MAC and 82563EB PHY
(Physical Layer). The ESB2 links to the PHY through a high-speed serial interface called
Kumeran. The Kumeran interface consists of two sets of Tx/Rx pairs for a total of eight
signals. The 82563EB PHY outputs two Gbit LAN ports and connects to a 1x2 RJ45 Gbit
connector that is accessible at the rear of the system.

Memory Board

One, two, or four memory boards can be installed. Each memory board has eight DIMM
sockets that support x4 or x8, single- or dual-rank FBD DDR2 DIMMs. FBD speeds of
533 MT/s (4-4-4, 5-5-5 latencies) and 667 MT/s (5-5-5 latency) are supported. DDR2
DRAM technologies of 512 Mbit, 1 Gbit, and 2 Gbit are supported. The memory boards
connect to the main board through x16 PCI Express* connectors. The memory boards
have LEDs that indicate the status of the memory board power and the status of each
DIMM.
28
®
RMM) for KVM support up to 165 MHZ
Intel® Server System S7000FC4UR Product Guide
®
Remote