Figure 79. Removing The Pci Dividers - Intel S7000FC4UR - Server System - 0 MB RAM Product Manual

13. Disconnect the chassis intrusion cable from the main board. To locate the cable
connection, see
14. Disconnect any cables still connected to the main board.
15. Lift the blue plunger in the center of the main board. See letter "A" in the following
figure.
16. While holding the plunger up, slide the main board toward the front of the chassis.
See letter "B" in the figure.
17. Use the plunger to lift the board from the chassis. See letter "C" in the figure.
18. Install a replacement main board. For instructions, see
on page
Intel® Server System S7000FC4UR Product Guide

Figure 79. Removing the PCI Dividers

Figure 46 on page
124.
A
B
87.
"Installing the Main Board"
AF002281
123