HP T1936AA - Digital Sending Software Support Manual page 67

FTP
The FTP attributes and their definitions are shown in table 4-21. Use
constant static or dynamic values as defined in MFP Component
Field Value References to set the attributes for this component.
Table 4-21. FTP attributes and definitions
Attribute
Server name
User name
User password
Destination
folder path
Overwrite
destination file
if file exists
Send-to-Printer component
Use the Send-to-Printer component to send scanned images directly
into a printer. Use this component to select the printer size, source,
and zoom level. All print drivers for each printer must be installed and
configured on the server.
Use the Send-to-Printer component to define and designate a printer
as the destination for images that are sent to the HP DSS Workflow
server. This component enables the MFP to define copying function
keys that scan documents and automatically send them to a defined
printer location.
This component can also be used to route to printers based on file
types. For example, print PDF files and TIFF images can be routed to
separate printers.
Using the Send-to-Printer component
Use the Send-to-Printer component to accomplish these tasks:
ENWW
Description
This is the fully supported FTP site.
This is a valid FTP user login for the designated FTP site.
This is a valid password for the FTP user login.
This is a destination path on the FTP server. This
parameter can be static or taken dynamically from the
input device.
If this attribute is set to Yes, the current file overwrites any
files that have the same name.
Scan files and route them to a remote printer (remote copy).
Scan files and send them to printers according to file types.
Scan in color and send the images to a color printer.
Component tab 63