Supported MFPs and firmware
To find the firmware and Jetdirect card information, use the following
procedure.
1
2
3
Environments and protocols
Network operating systems
The HP DSS Workflow is directly connected to transmission control
protocol/internet protocol (TCP/IP) networks through a server or
workstation. It operates independently within the following network
and operating system (OS) requirements:
Novell NetWare support
With access to Novell file servers, HP DSS Workflow can write files
into network folders and support network fax folders that reside on
Novell servers. The Novell client software must be installed on the
network and correctly configured before Novell-specific attributes can
be configured in HP DSS Workflow.
20 Chapter 3 - Setup, installation, and authentication
HP LaserJet 4100mfp: 03.757.0 or later
HP LaserJet 9000mfp: 03.757.0 or later
HP LaserJet 9055mfp
HP LaserJet 9065mfp
HP Jetdirect J4169 or J6057: 24.08 or later
Type http://<YOURDEVICEADDRESS> (where
<YOURDEVICEADDRESS> is the IP address of the MFP that
you are researching) into the Web browser.
Click the Networking tab (not applicable for the
HP LaserJet 9055mfp or 9065mfp).
Click Configuration Page and then look for the model number.
Windows 2000 workstation or server or Windows XP Professional
Fast Ethernet 100Base-TX or Ethernet 10Base-T
Microsoft Internet Explorer 4.0 or later
ENWW
Need help?
Do you have a question about the T1936AA - Digital Sending Software and is the answer not in the manual?