Hp Dss Workflow Configuration On The Mfp - HP T1936AA - Digital Sending Software Support Manual

HP DSS Workflow configuration on the MFP

Use the following steps to configure the software after installation.
1
2
3
4
28 Chapter 3 - Setup, installation, and authentication
Using the Web browser, go to the following address for the printer
home page:
http://<printeraddress>/
On the Information tab, in the Other Links dialog box, select
HP DSS Workflow.
Type the following information:
a Type the HP DSS Workflow server IP address into the Server
field.
b Verify the IP port to connect to the HP DSS Workflow server.
Note that the same port ID must be typed in the Port field on
the Preferences tab.
c Type an interval, in minutes, in the Interval field for the menu-
refresh frequency. The default value is 60 minutes.
Click the Save button to save the setting.
ENWW