Re-Imaging The Solution Engine Hard Drive - Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual

Installation guide
Table of Contents

Advertisement

Chapter 4
Administering Cisco Secure ACS Solution Engine
Result: The system reboots, and then displays the system version information followed by:
Status: The appliance is functioning properly
Login:
Type Administrator, and then press Enter.
Step 8
The password is case sensitive.
Step 9
At the
Result: The system displays the system prompt.
Step 10
At the
Enter.
Step 11
At the
Note
At the
Step 12
Result: The system displays the message:
Password is set successfully.

Re-imaging the Solution Engine Hard Drive

Use the ACS SE Recovery CD-ROM to re-image the ACS SE if necessary.
Performing this procedure destroys all data stored on the ACS SE.
Caution
To re-image your ACS SE:
Connect a console to the ACS SE console port. For the location of the console port, see
Step 1
page
Step 2
Put the Recovery CD in the ACS SE CD-ROM drive. See
Step 3
Power on the ACS SE. (Or, if the solution engine is already running, reboot it.) For more information,
see
Result: The ACS SE displays the message:
ACS Appliance Recovery Options
[1] Reset administrator account
[2] Restore hard disk image from CD
[3] Exit and reboot
Enter menu item number: [ ]
Type 2, and then press Enter.
Step 4
Result: The ACS SE displays the message:
OL-9969-03
prompt, type setup, and then press Enter.
password
Enter new account name:
Enter new password:
The new password must contain a minimum of 6 characters, and it must include a mix of at least
3 character types (numerals, special characters, uppercase letters, and lowercase letters). Each
of the following examples is acceptable: 1PaSsWoRd, *password44, Pass*word.
Enter new password again:
1-5.
Rebooting the Solution Engine From a Serial Console, page
prompt, type the name of the ACS SE administrator. and then press
prompt, enter the new ACS SE password. Press Enter.
prompt, type the new ACS SE password, and then press Enter.
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Recovery Management
Figure 1-2 on page
1-5.
4-3.
Figure 1-2 on
4-25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Secure acs solution engine 4.1

Table of Contents