Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 86

Recovery Management
This operation will completely erase the hard drive. Press 'Y' to confirm, any other key
to cancel: __
The next step erases the ACS SE hard drive. You will permanently lose all system data that you have not
Caution
backed up.
Type Y.
Step 5
Result: The ACS SE processes the new image (this may take more than 2 minutes) while displaying odd
characters and then displays the message:
The system has been reimaged successfully. Please remove this recovery CD from the drive,
then hit RETURN to restart the system:
Remove the Recovery CD from the ACS SE.
Step 6
Press Enter to restart the ACS SE.
Step 7
Result: The ACS SE reboots, performs some configurations, and reboots again. The configurations that
occur after the first reboot take a significant amount of time, during which there is no feedback, which
is normal system behavior.
After re-imaging the solution engine hard drive, you must once again perform initial configuration of the
Note
ACS SE. For detailed instructions, see
Installation Guide for Cisco Secure ACS Solution Engine 4.1
4-26
Chapter 4 Administering Cisco Secure ACS Solution Engine
Configuring ACS SE, page 3-11.
OL-9969-03