Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 120

Commands
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set dbpassword command to begin resetting the database password. Subsequent prompts take
you through the process. For more information, see
page
Example
The following command initiates the database password setting procedure:
set dbpassword
set domain
To set the DNS domain of the ACS SE, use the set domain command:
set domain [domain-name]
Syntax Description
domain-name
Example
This command sets the domain name to xyz.com:
set domain xyz.com
set hostname
To set the hostname of the ACS SE, use the set hostname command:
set hostname [
Syntax Description
hostname
Example
This command sets the ACS SE name to acs1:
set hostname acs1
set ip
To set the ACS SE IP configuration, use the set ip command:
set ip
Installation Guide for Cisco Secure ACS Solution Engine 4.1
C-12
4-18.
Name of DNS domain.
hostname
]
Name of the ACS SE.
Appendix C
Resetting the Solution Engine Database Password,
Command Reference
OL-9969-03