Cisco CSACSE-1111-K9 - Secure Access Control Server Solution Engine Installation Manual page 113

Appendix C Command Reference
Example
The following command logs you out of the system:
exit
exportgroups
To export a list of user groups, use the exportgroups command:
exportgroups [server] [username] [filepath]
The CSAuth service is temporarily halted while this command executes. This process interrupts any user
Note
authentication.
Syntax Description
server
username
filepath
Usage Guidelines
If you do not enter the parameters, the system prompts you for the information.
Example
The following command employs the user account joeadmin to send a list of user groups to the
groupdata folder on the diamond FTP server:
exportgroups diamond joeadmin groupdata
exportlogs
To list and send selected logs to an FTP server, use the exportlog command:
exportlogs [filename] [filename]
Syntax Description
filename
Usage Guidelines
This command lists all the log files that you can download to an FTP server if no filenames are supplied.
Otherwise, you can enter each filename with a space separating each filename. You are then prompted
for the FTP server address, user login name, password, and the filepath for the file or files to be uploaded.
OL-9969-03
Hostname for the FTP server to which the file will be sent.
User account name used to authenticate the FTP session.
Location under the FTP root for the server into which the group list will be sent.
Name of the file to be exported.
Installation Guide for Cisco Secure ACS Solution Engine 4.1
Commands
C-5