System Board Drive Connections - HP Compaq MultiSeat ms6000 Hardware Reference Manual

CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the computer,
and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid
touching the connector. For more information about preventing electrostatic damage, refer to Appendix
D, Electrostatic Discharge on page
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label
the package "Fragile: Handle With Care."

System Board Drive Connections

Refer to the following illustration and table to identify the system board drive connectors.
Figure 2-19
Table 2-4
No.
1
2
3
4
5
26 Chapter 2 Hardware Upgrades
To prevent loss of work and damage to the computer or drive:
System Board Drive Connections
System Board Drive Connections
System Board Connector
SATA0
SATA1
SATA2
SATA3
Media Card Reader
53.
System Board Label
SATA0
SATA1
SATA2
SATA3
MEDIA
Color
dark blue
white
light blue
orange
black
ENWW