Table of Contents
Advertisement
Diskette-eject button: Push this button to release a diskette from the drive.
Hard disk drive status light: Each of the hot-swap drives has a hard disk drive
status light. When this amber LED is on continuously, the drive has failed. This
status light is active only with a ServeRAID adapter installed in the server.
Hard disk drive activity light: Each of the hot-swap drives has a Hard Disk
Activity light. When this green LED is flashing, the controller is accessing the
drive.
CD eject button: Push this button to release a CD from the drive.
CD drive activity light: When this light is on, it indicates that the CD-ROM drive
is in use.
Rear view
Ethernet 1 speed
indicator (green)
Ethernet 2 speed
indicator (green)
Ethernet 1 speed indicator: This green LED lights when the speed of the Ethernet
LAN that is connected to Ethernet port 1 is 100 Mbps.
Ethernet 1 link indicator: This green LED lights when there is an active link
connection on the 10BASE-T or 100BASE-TX interface for Ethernet port 1.
Advanced system management: The RS-485 ports (in and out) are used for
creating a system management bus between several servers.
Select light: This green LED lights when the monitor, keyboard, and mouse are
logically connected to this server. This light duplicates the Select button LED on
the front of the server.
Cable Chaining Technology OUT: This port is used to connect the server to a
keyboard, monitor, and pointing device. It is also used to connect multiple servers
together to share a single keyboard, monitor, and pointing device.
Serial port: Signal cables for modems or other serial devices connect here to the
9-pin serial port connector.
Cable Chaining Technology IN: This port is used to connect multiple servers
together to share a single keyboard, monitor, and pointing device.
USB 2 Universal Serial Bus 2
Ethernet 1 link
Advanced systems
indicator (green)
management RS-485
Select light (green)
Ethernet 2 link
indicator (green)
Power-on light
(green)
C2T IN port
USB 2
Serial port
USB 1
C2T OUT port
System error
light (amber)
7
General information
Advertisement
Table of Contents
