IBM 867413x - Eserver xSeries 330 8674 Hardware Maintenance Manual page 128

Beep/Symptom
2-1-1 (Secondary DMA register
failed)
2-1-2 (Primary DMA register failed)
2-1-3 (Primary interrupt mask
register failed)
2-1-4 (Secondary interrupt mask
register failed)
2-2-2 (Keyboard controller failed)
2-2-3 (CMOS power failure and
checksum checks failed)
2-2-4 (CMOS configuration
information validation failed)
2-3-1 (Screen initialization failed)
2-3-2 (Screen memory failed)
2-3-3 (Screen retrace failed)
2-3-4 (Search for video ROM failed)
2-4-1 (Video failed; screen believed
operable)
3-1-1 (Timer tick interrupt failed)
3-1-2 (Interval timer channel 2
failed)
3-1-3 (RAM test failed above
address OFFFFH))
3-1-4 (Time-Of-Day clock failed)
3-2-1 (Serial port failed)
3-2-2 (Parallel port failed)
3-2-4 (Failure comparing CMOS
memory size against actual)
3-3-1 (Memory size mismatch
occurred; see "Memory Settings" on
page 30)
3-3-2 (Critical SMBUS error
occurred)
120
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674
FRU/Action
1. System Board
1. System Board
1. System Board
1. System Board
1. Keyboard
2. System Board
1. Battery
2. System Board
1. Battery
2. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. DIMM
2. System Board
1. Battery
2. System Board
1. System Board
1. System Board
1. DIMM
2. System Board
3. Battery
1. DIMM Board
2. System Board
3. Battery
1. Disconnect the server/workstation power cord from outlet, wait 30
seconds and retry.
2. System Board
3. DIMMs
4. DASD Backplane
5. DASD Power Cable