Fan assembly replacement
The server/workstation comes with six replaceable fans.
Attention:
cooling.
The following illustration shows the replacement of a fan.
Note: The illustrations in this document might differ slightly from your hardware.
Complete the following steps to replace the fan assembly:
1. Review the safety precautions listed in "Safety information" on page 147.
2. Turn off the server/workstation and peripherals; disconnect cables and cords.
92
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674
Slot
Top view of
heatsink
Terminator card
Replace a fan that has failed within 48 hours to help ensure proper
Heatsink release
lever
Clip
Heatsink
Microprocessor
Retainer clip
Air flow