Table of Contents
Advertisement
v LAN, serial, and Advanced System Management (ASM) interconnect remote
v Point-to-point protocol (PPP) support
v Simple Network Management Protocol (SNMP) and e-mail alerts
v Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP)
v Remote power control
v Microsoft Windows NT and Windows 2000 blue-screen capture
v Remote firmware update and access to critical server settings
v Independent power, which enables around-the-clock access to the server even
About your documentation
The documentation that comes with the Remote Supervisor Adapter includes the
following:
v IBM Remote Supervisor Adapter Installation Guide (this book)
v IBM Documentation CD
System requirements
The IBM Documentation CD includes the IBM Documentation Browser. You can use
the Documentation Browser to view the Remote Supervisor Adapter
documentation from your server or any workstation that meets the following
requirements:
v Microsoft Windows NT 4.0 (with Service Pack 4 or later), Windows 95, Windows
v 100 MHz Pentium-class microprocessor
v 32 MB RAM
v Adobe Acrobat Reader 3.0 or later (Adobe Acrobat Reader software is included
58
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674
access
support
when the server power is off.
This printed document is designed to assist you with the installation of the
adapter.
This CD contains the publications for the Remote Supervisor Adapter in Adobe
Acrobat Portable Document Format (PDF). The publications on the CD are:
– IBM Remote Supervisor Adapter Installation Guide (this book)
– IBM Remote Supervisor Adapter User's Guide for the xSeries 330
The User's Guide describes the features and functions of the Advanced System
Management (ASM) Web interface and the text-based user interface.
– IBM Safety Book
Before you install the Remote Supervisor Adapter, be sure to read the caution
and danger statements that are contained in this book.
98, Windows 2000, IBM OS/2 Warp 3.0 (with Fix Pack 32 or later), or IBM OS/2
Warp 4.0 (with Fix Pack 5 or later)
on your IBM Documentation CD, and you can install it when you run the
Documentation Browser)
Advertisement
Table of Contents
