Table of Contents
Advertisement
Note: If you already are running the diagnostic programs, begin with step 3.
To view the test log:
1. Turn on the server/workstation and watch the screen.
If the server/workstation is on, shut down your operating system and restart
the server/workstation:
2. When the message
If a power-on password is set, the server/workstation prompts you for it. Type
in the appropriate password; then, press Enter.
3. When the Diagnostic Programs screen appears, select Utility from the top of
the screen.
4. Select View Test Log from the list that appears; then, follow the instructions on
the screen.
The system maintains the test-log data while the server/workstation is
powered on. When you turn off the power to the server/workstation, the test
log is cleared.
appears, press F2.
17
Diagnostics
Advertisement
Table of Contents
