IBM 867413x - Eserver xSeries 330 8674 Hardware Maintenance Manual page 136

Error Code/Symptom
185 (Drive startup sequence information
corrupted)
186 (Security hardware control logic
failed)
187 (VPD serial number not set.)
188 (Bad EEPROM CRC #2)
189 (An attempt was made to access the
server/workstation with invalid
passwords)
201 (Memory test error, see "Memory
Settings" on page 30.) If the
server/workstation does not have the
latest level of BIOS installed, update the
BIOS to the latest level and run the
diagnostic program again.
229 (Cache error)
262 (DRAM parity configuration error)
289 (DIMM has been disabled by the user
or system, see "Memory Settings" on page
30.)
301 (Keyboard or keyboard controller
error)
303 (Keyboard controller error)
602 (Invalid diskette boot record)
604 (Diskette drive error)
605 (Unlock failure)
662 (Diskette drive configuration error)
128
Hardware Maintenance Manual: xSeries 330 Type 8674, IntelliStation R Pro Type 6851, and Network Equipment Building
System Type 8674
FRU/Action
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Set serial number in Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup, enter the administrator password
1. DIMM
2. System Board
1. Processor
2. Optional Processor (if installed)
1. Run configuration / setup
2. Battery
3. System Board
1. Run Configuration/Setup, if disabled by user
2. Disabled DIMM, if not disabled by user.
3. System Board.
1. Keyboard
2. System Board
1. System Board
1. Diskette
2. Diskette Drive
3. Cable
4. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board
1. Diskette Drive
2. Drive Cable
3. System Board
1. Run Configuration/Setup and Diagnostics
2. Diskette Drive
3. Drive Cable
4. System Board