Table 4. Meanings of the status LEDs on the front panel (continued)
LED
State
Ethernet status
On
LED
Blinking
Off
System status
On
LED
On
Rear view
Figure 4 "Rear view of the server" on page 12 shows the locations of the connectors and parts on the
rear of the server.
Figure 4. Rear view of the server
1
Power cord connector
2
Serial port
3
VGA monitor connector
4
USB connectors (4)
Connector
Ethernet connector
Power cord connector
Serial port
12
ThinkServer TD230 Installation and User Guide
Color
Green
The server is linked to a local area network (LAN).
The LAN is active and data is being transferred.
Green
Off
The server is not linked to a LAN.
Amber
The system has error(s) and alarm(s).
Green
The system is booted and ready.
5
PCI card zone
6
Ethernet connector 2
7
Ethernet connector 1
8
Front door key (cut the plastic clip to get the key)
Used to attach an Ethernet cable for a LAN.
Used to connect the power cord.
Used to attach a device that uses a 9-pin serial port.
Description
Description