Removing And Reinstalling The Front Bezel - Lenovo 102912U Installation And User Manual

6. Pivot the server cover outward to completely remove it.
Figure 12. Removing the server cover
To reinstall the server cover, see "Installing the server cover" on page 91.

Removing and reinstalling the front bezel

Attention:
Do not open your server or attempt any repair before reading and understanding the Safety Information and the
Warranty and Support Information on the ThinkServer Documentation DVD that came with your product, and
"Guidelines" on page 21. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove and reinstall the front bezel.
To remove and reinstall the front bezel, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See "Removing the server cover" on page 23.
.
Chapter 5 Installing, removing, or replacing hardware
25