Processor Board - Compaq ProLiant 2500 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Removal and Replacement Procedures
2-32
6. Unlatch the lever and lift.
7. Remove processor chip.
Reverse steps 1 to 7 to replace the processor chip.

Processor Board

The processor board can be replaced only by replacing the processor tray assembly.
1. If installed, remove the security screw for the processor tray assembly.
2. Slide out the processor tray assembly from the rear of the unit.
3. Remove memory modules and install them on the new processor tray assembly.
4. Remove the processor power module and install it on the new processor tray
5. Remove the processor chip and install it on the new processor tray assembly.
6. Slide in the new processor tray assembly.
CAUTION: Align the pin pattern on the processor to that of
the processor socket.
assembly.