. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Removal and Replacement Procedures
2-8
Security Screws
If security screws are in place, you must remove them before you can remove the system
I/O board tray assembly, the processor tray assembly, or the system I/O fan.
Figure 2-7.Removing Three Security Screws
1. If the computer is ON, turn it OFF and disconnect the power cord.
2. Disconnect any other external equipment connected to the computer.
3. Remove the large access panel.
4. Remove the security screws.
MSG039.eps
1