Large Access Panel; Compaq Proliant 2500 - Compaq ProLiant 2500 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Removal and Replacement Procedures
2-6
3. Remove the screws from the front bezel panel and remove it.
Reverse steps 1 to 3 to replace the front bezel.

Large Access Panel

On the Compaq ProLiant 2500 Server, the large access panel is the side panel. On the
Compaq ProLiant 2500R Server, the large access panel is the top panel.

Compaq ProLiant 2500

Figure 2-5.Removing the Large Access Panel from the Compaq ProLiant 2500
1. Unlock and open the front bezel door.
2. Loosen the thumb screws on the front panel.
3. Slide the large access panel toward the rear of the unit 0.5 inch (1.5 cm).
4. Lift and remove the large access panel.
Reverse steps 1 to 4 to replace the large access panel.
MSG006.EPS
CAUTION: Do not operate the server with the large access
panel removed. The large access panel is an integral part of
the cooling system and removing it while the system is
running may adversely affect data integrity.