Compaq ProLiant 2500 Maintenance And Service Manual page 86

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Diagnostic Tools
3-34
Error
Code
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
NetFlex-2 ENET-TR Controller and
NetFlex-2 Token Ring Controller Test Error Codes
Description
Network card ID failed
Network card setup failed
Network card transmit failed
Network card Configuration failed
Network card Reset failed
Network card Internal failed
Network card External failed
Network card Open failed
Table 3-15
Recommended Action
The following steps apply to error
codes 6000-xx through 6089-xx:
1. Check the controller
installation in the EISA slot.
2. Check the interrupt type and
number setting.
3. Check the media connection
at the controller and MAU*.
4. Check the media speed (4/16
) and type (UTP/STP**) settings.
5. Check the MAU, cabling, or
other network components.
6. Replace the controller.
* MAU = Multistation Access Unit
** UTP/STP = Unshielded Twisted
Pair/Shielded Twisted Pair.