Compaq ProLiant 2500 Maintenance And Service Manual page 80

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Diagnostic Tools
3-28
Error
Code
1101-xx
1109-xx
Error
Code
1201-xx
1202-xx
1203-xx
1204-xx
1206-xx
1210-xx
Serial Test Error Codes
Description
Serial port test failed
Clock register test failed
Modem Communications Test Error Codes
Description
Modem internal loopback test failed
Modem time-out test failed
Modem external termination test failed
Modem auto originate test failed
Dial multi-frequency tone test failed
Modem direct connect test failed
Table 3-9
Recommended Action
The following steps apply to error
codes 1101-xx and 1109-xx:
1. Check the switch settings on
the Serial/Parallel Interface
board (if applicable) and
retest.
2. Replace the Serial/Parallel
Interface board (if applicable)
and retest.
3. Replace the system board
and retest.
Table 3-10
Recommended Action
The following steps apply to error
codes 1201-xx through 1210-xx:
1. Refer to the modem
documentation for correct
setup procedures and retest.
2. Check the modem line
and retest.
3. Replace the modem and
retest.