. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Removal and Replacement Procedures
2-34
Power Supply
Figure 2-33.Removing the Power Switch
1. Remove the large access panel.
2. Disconnect all power connectors from boards and/or peripheral devices.
3. Remove the retaining screw from the power switch bracket [A].
4. Press the release tab on the power switch bracket [B] and slide the bracket back [C]
5. Remove power switch and cable from bracket (refer to Figure 2-35).
MSG024.EPS
and up [D].
MSG004.EPS
B
C
D
A