. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
System I/O and Processor Backplane Board
Power Supply
Connectors
Figure 2-24. Removing the System I/O and Processor Backplane Board
1. Remove the large access panel.
2. Remove the processor tray assembly.
3. Remove the system I/O board tray assembly (refer to "System I/O Board Tray
4. Disconnect the signal and power cables for the processor backplane board.
Figure 2-25. Removing the System I/O and Processor Backplane Board
Assembly" later in this document).
MSG034.EPS
CD ROM Connector
Floppy Connector
SCSI LED
Connector
Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
Power Supply
Connector
Fan
Connectors
SCSI
Connector
MSG038.EPS
2-25