Compaq ProLiant 2500 Maintenance And Service Manual page 63

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
POST Error Messages
1600-Server
Manager/R Failure
1610-Temperature
violation detected.
Waiting for system
to cool
1611-Fan failure
detected
1612-Primary
power supply
failure.
1703-SCSI Cable
Error Detected
1730-Fixed Disk 0
does not support
DMA Mode
1731-Fixed Disk 1
does not support
DMA Mode
1740-Fixed Disk 0
failed Set Block
Mode command
1741-Fixed Disk 1
failed Set Block
Mode command
1750-Fixed Disk 0
failed Identify
command
1751-Fixed Disk 1
failed Identify
command
1760-Fixed Disk 0
does not support
Block Mode
1761-Fixed Disk 1
does not support
Block Mode
Continued
Error Code Beeps
None
2S
2S
2S
None
None
None
None
None
None
None
None
None
Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
Probable Source of
Problem
Server Manager/R
board failure. Error
code displays after
error message.
Ambient system
temperature too hot.
Required fan not
installed or spinning.
Primary power supply
has failed.
Internal SCSI cable not
attached to system
connector.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Fixed disk drive error.
Action
Run Diagnostics.
Replace failed
assembly as indicated
or contact your service
provider.
Check fan in system
environment.
Check fans.
Replace power supply
as soon as possible.
Attach terminated
cable or internal SCSI
cable.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
Run the System
Configuration Utility
and correct.
3-11