. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . .
Pentium Pro Processor Board
Three switchbanks, located on the Pentium Pro processor board, control the bus/core
frequency ratio.
Figure 4-2.Location of Pentium Pro Processor Board Switches
The following section defines the functions for switchbanks 1 to 3 on the processor board.
The default positions are indicated in Table 4-2.
CAUTION: Setting the processor switchbanks incorrectly can
result in permanent damage to the processor and/or data
loss.
CAUTION: Processors on the same processor board MUST be
installed in matched frequency.
SW1
SW3
SW2
Compaq ProLiant 2500 Family of Servers Maintenance and Service Guide
MSG044.EPS
4-3