Locating The Server Access Panel Labels - Compaq ProLiant 6000 Series Setup And Installation Manual

Locating the Server Access Panel Labels

A significant amount of server configuration and options installation
information is provided on the access panel labels. As shown in the figure
below, these labels are located on the inside of the top access panel, the left side
access panel, and the right side access panel. To remove the appropriate panel,
see Chapter 4, "Installing Hardware Options."
IMPORTANT: These labels do not contain warning and caution information.
Refer to this guide or to the option documentation for the applicable
warnings and cautions.
Figure 2-2.
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
I/O Fan Removal Label
Location of server access panel labels
I/O, Expansion and
Standard Peripheral
Board Configuration Label
Processor Board Configuration
Label on both side panels.
Compaq ProLiant 6000 Setup and Installation Guide
2-9