Setting The Multifeed Detection Method - Fujitsu 6000NS - fi - Document Scanner Operator's Manual

5. Press the [OK] button.
⇒
The new admin password is set.

3.5.7 Setting the Multifeed Detection Method

By default, multifeed detection will monitor for paper overlaps in the central column (width:
35mm) of the document being scanned. However, any photos or attachments in this area will also
be detected as a multifeed.
When scanning documents, multifeed detection area may be adjusted to ignore the area (excluding
the photograph or attachments) and prevent mis-detections.
For document requirements for multifeed detection, refer to
(page 320).
1. Select the [System Settings] tab on the top menu.
2. Press the [Down] button on the left side menu.
⇒
Scroll the left side menu down until the [Multifeed Settings] tab appears.
3. Select the [Multifeed Settings] tab on the left side menu.
⇒
The "Multifeed Settings" screen appears.
62
"A.5 Multifeed Detection Conditions"