Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 334

Problem
Multifeed errors
occur frequently.
Paper is not fed into
the scanner.
(Pick errors are fre-
quent or document
feed stops midway)
Scanned data is
elongated.
Shadow on the
leading edge of the
scanned data.
Vertical line on the
scanned data.
Scanned data
appears skewed or
distorted.
Quality of scanned
data is poor.
Cannot login with
administrator pass-
word.
306
Check item
Do the documents satisfy the condi-
tions given in "A.2 Paper Require-
ments" (page 315)?
Has the document been loaded cor-
rectly into the ADF paper chute?
Is the document stack more than
5mm thick?
Is the pad assembly dirty?
Is the pad assembly worn out?
Do the documents satisfy the condi-
tions given in "A.2 Paper Require-
ments" (page 315)?
Is the pick roller dirty?
Is the pick roller worn out?
Is there any foreign matter in the
document feed path?
Are the feed rollers dirty?
Are the feed rollers dirty?
Are the glass scanner windows dirty?
Has the document been loaded cor-
rectly?
Are the glass scanner windows dirty?
Was the Caps Lock on when the
password was entered?
Suggestion
Use documents which satisfy the condi-
tions described in "A.2 Paper Require-
ments" (page 315).
Riffle and realign the document stack,
then load it back into the ADF paper
chute.
Remove sheets from the stack to reduce it
to a thickness of 5mm or less.
Clean the pad assembly.
For more details, refer to
the ADF" (page 266).
Replace the pad assembly.
For more details, refer to
Parts" (page 273).
Use documents which satisfy the condi-
tions described in "A.2 Paper Require-
ments" (page 315).
Clean the pick roller.
For more details, refer to
the ADF" (page 266).
Replace the pick roller.
For more details, refer to
Parts" (page 273).
Clean the document feed path.
Clean the feed rollers.
For more details, refer to
the ADF" (page 266).
Clean the feed rollers.
For more details, refer to
the ADF" (page 266).
For more details on cleaning the glass
scanner windows, refer to
Scanner Care" (page 263).
Load the document correctly.
Clean the glass scanner windows.
Turn off the Caps Lock and try logging in
again.
If the password has been lost or forgot-
ten, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.
"5.2 Cleaning
"5.5 Replacing
"5.2 Cleaning
"5.5 Replacing
"5.2 Cleaning
"5.2 Cleaning
"Chapter 5