Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 397

Screen
Save When the file format is [MTIFF], the
maximum file size for the total
scanned data is 2GB. If the size of the
scanned data exceeds 2GB, no MTIFF
files can be created.
Saving Saving scan data to XXXX
File Server User name is required.
Authentication
Network is busy. Try again later.
User name or password may be incor-
rect.
Cannot find the network folder path.
File already exists. Choose a different
name or change the overwrite permis-
sion setting.
Not connected to the network.
Scan&Buffer job is already queued on
the computer that owns the specified
network folder.
Access was refused.
Insufficient free space in the desig-
nated network folder.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Try the following:
• Delete scanned pages from
Scan Viewer until the total file
size of the scanned data is less
than 2GB.
• Increase the compression level
and try scanning again.
No action required
Enter a user name.
Wait for a while, and try again.
Re-enter the user name and pass-
word.
Contact a server administrator.
Change the file name, or select
[Yes] to overwrite the file with the
same name.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network folder. If
the system network is not operat-
ing correctly, refer to "Failure to
connect to a server using its IP
address" (page 298) for further
solutions.
Try the following:
• Select a different network
folder.
• Wait a short time, then try
again.
Contact a server administrator to
find out if an access permit has
been set.
Ensure the free space requirements
are met, and try again.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
C
369