Using The Network Settings Menus; Giving The Scanner An Ip Address - Fujitsu 6000NS - fi - Document Scanner Operator's Manual

3.6

Using the Network Settings Menus

3.6.1 Giving the Scanner an IP Address

An IP address must be set in order to connect the scanner to a network.
ATTENTION
1. Select the [Network Settings] tab on the top menu.
2. Select the [IP Address] tab on the left side menu.
⇒
The DHCP or IP address setting screen appears.
Do not use an IP address that already exists in the network. IP address
duplication will cause a network connection error. For more details about
how to deal with such errors, refer to
sages" (page 329).

3.6 Using the Network Settings Menus

"C.1.1 Administrator Screen Mes-
Network Scanner fi-6000NS Operator's Guide
3
69