Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 322

Network settings
The information shown is
valid, but pinging indicates
that the network connection
is not functioning normally.
OK: Connection is operating normally.
■ Checking the NTP server settings by synchronizing the system
time
On the "NTP Server" screen, press the [Sync Time] button to check if the system time can be syn-
chronized.
After pressing the [Sync Time] button, a message dialog such as the following is displayed:
294
Connection
status
In "3.6.12 Checking the Network Operating
NG
Status" (page
Duplex Mode] from "Auto-Negotiation" to a
fixed mode.
If the problem persists, refer to
nect to a server using its IP address" (page 298)
for further solutions.
NG: Connection is faulty.
Action
124), change the [Link Speed/
"Failure to con-