Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 32

No.
1 Startup button
Scan button
2
LCD touch panel
3
4 Keyboard
5 Output tray
6 ADF paper chute
7 Side guides
8 Top cover
9 ADF release button
10 Security cable slot
11 AC adaptor connector
12 LAN connector
4
Part name
Turns on scanner or brings up the "Login" screen from
standby mode. For details, refer to
Button" (page
Starts the scan process.
For details, refer to
Accepts user input and displays the scanner control screens.
The LCD touch panel buttons are used to setup scans. For
details, refer to
Used to enter text in the control screen input fields.
May also be used instead of the touch panel to operate the
control screens. For details, refer to
(page
Scanned documents are ejected from the ADF onto this tray.
Small documents may be retrieved by flipping up the key-
board after scanning has completed.
Holds the documents waiting to be scanned (scan side down).
Adjust to the width of the paper, to prevent skewing of the
scanned pages.
Frames the LCD touch panel, and covers the upper scanner/
ADF mechanism. Must be opened to clean inside the scanner,
or when replacing consumable parts.
Push to unlock the top cover.
Slot for commercially available security cable to prevent
against theft.
The following security cable is recommended.
Type: Right angle
Cylindrical part: diameter 25mm (max), length 50mm (max)
(includes bent part if a straight cable is used)
Connects the scanner to the AC adaptor.
Connects the scanner to the network.
Function
22).
"2.1.2 Using the Scan Button" (page
"2.2 Using the LCD Touch Panel" (page
25).
"2.1.1 Using the Startup
"2.3 Using the Keyboard"
23).
24).