Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 374

Screen
System Set-
tings File
System Update
Technical Sup-
port
346
Message
Backup data could not be restored.
Specified file contains unsupported
data.
System settings were successfully
restored. The scanner will be restarted.
Maximum file path length is 253 char-
acters.
Specified system update contents are
invalid.
Specified update file cannot be applied
to this system.
Specified update file could not be
uploaded, or is not a valid system
update.
This system update has already been
applied.
System Version x.x.x.x
The system needs to be restarted to
finalize the update. OK to update
now?
OK: update and restart immediately.
Net-login will not be possible until the
restart completes.
Cancel: return to the Update screen
without updating.
System update has completed and
scanner is being restarted.
Net-login will not be possible until the
restart completes.
Information output level has not been
set.
Action
Versions do not match between the
backup device and restoring
device.
Update the restoring device.
"3.9.3 Updating the Scanner's
System Software" (page 161)
No action required.
Set a file path that is no longer
than 253 characters long.
Check the contents of the specified
system update.
Check the applicable system for
the update file.
Try the following:
• Check if the specified update
file is correct, and try again.
• Specified update file may not be
uploaded because of network
error. Check the network status.
No action required.
Press the [OK] button to update
the system now.
Otherwise, press the [Cancel] but-
ton.
No action required.
Enter an information output level.