Table of Contents
Advertisement
Screen
NTP Server
334
Message
NTP Server IP Address has not been
entered.
NTP Server IP Address is incomplete.
NTP Server Name has not been entered.
NTP Server Name contains invalid
characters.
NTP Server IP address is invalid.
System time has been successfully
synchronized.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
no time data was available.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
only stale time data was available.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
the required time change was too big.
Time synchronization has caused the
session to timeout. Logging out now.
Action
Enter an NTP server IP address.
Complete the NTP server IP
address.
Enter an NTP server name.
Enter a valid NTP server name.
Enter a valid NTP server IP
address.
No action required.
Try the following:
• Check the NTP server name and
address settings for errors.
• Check the network path
between to the NTP server for
problems.
• The NTP server may be busy.
Wait a short time before trying
again to synchronize the system
time. If that does not work, the
specified server may not be an
NTP server, so try a different
NTP server.
• The specified NTP server can-
not provide a trusted date and
time. It attempted to acquire the
date and time from a higher
level NTP server, but failed. Try
a different NTP server or have
the network administrator
investigate.
Refer to
"3.5.4 Setting the Date/
Time" (page
55), adjust the date/
time, and try again.
No action required.
Advertisement
Table of Contents
Troubleshooting
