Table of Contents
Advertisement
Screen
Print Server
Authentication
366
Message
User name is required.
Network is busy. Try again later.
User name or password may be incor-
rect.
Cannot find the network printer path.
Not connected to the network.
Scan&Buffer job is already queued on
the computer that owns the specified
network printer.
Access was refused.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Specified user is no longer able to
login to this network printer.
Specified password is no longer valid
for this network printer.
Error: network printer could not be
accessed.
Action
Enter a user name.
Wait for a while, and try again.
Re-enter the user name and pass-
word.
Contact a server administrator.
Check that the system network is
functioning normally by perform-
ing a ping test from another
machine in the network, other than
the server with network printer. If
the system network is not operat-
ing correctly, refer to
connect to a server using its IP
address" (page 298)
for further
solutions.
Try the following:
• Select a different network
folder.
• Wait a short time, then try
again.
Contact a server administrator to
find out if an access permit has
been set.
Close unneeded network connec-
tions, then try specifying the
desired network path again.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated.
Try the following:
• Login with a different account.
• Contact a network administra-
tor to have the account vali-
dated again.
Contact a network administrator to
check whether the network folder
can store data.
"Failure to
Advertisement
Table of Contents
Troubleshooting
