Setting for Multifeed Detection in Manual Feeding [Multifeed detection when
scanning in manual feeding mode]
Configure this setting when you want to enable multifeed detection for scanning in Manual Feed mode.
1
Start up the Software Operation Panel.
Refer to
Starting Up the Software Operation Panel (page
2
From the listing on the left, select [Device Setting 2] → [Multifeed detection when scanning in manual
feeding mode].
3
Select a detection method.
Detection
Disable
Follow driver settings
193).
Description
Does not detect multifeeds.
Detects multifeeds if multifeed detection is enabled
in the scanner driver settings.
254
Operational Settings