Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 411

Code
84000003 An error has occurred. The sys-
tem must be restarted. Any
buffered jobs will be canceled.
After restarting the system, if
the same error occurs, it may be
due to a scanner failure. In this
case, remove any documents
that have been fed into the scan-
ner, disconnect and reattach the
power cord, and restart the sys-
tem again. If problem persists,
the administrator should contact
a FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits]
Message
If the problem persists, the administrator
should contact a FUJITSU scanner dealer
or an authorized FUJITSU scanner service
provider.
Network Scanner fi-6000NS Operator's Guide
Action
383
C