5. Set the width to be removed from the edges of the scanned data.
The default is "2" mm.
The width must be set between 0 mm and 5 mm. If margin removal is not required, enter "0"
mm.
Frame of Scanned Data
Print Sheet
Scanned Data
No Margin Removal
6. Press the [OK] button.
⇒
The width to be removed from the edges of the scanned data is set.
ATTENTION
106
Print Sheet
Scanned Data
Margin Removal
When this setting is enabled, and 600dpi resolution is selected, scanning
may take a long time than usual.
Edge of Scanned Data
Margin Removal