Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 415

Code
12040001 Cannot find the network folder
path.
12040002 Access to network folder was
refused.
12040003 File already existed, so data
could not be saved.
12040005 Network is busy. Try again
later.
12040006 User name or password may be
incorrect.
12040007 Not connected to the network.
12040008 Scan&Buffer job is already
queued on the computer that
owns the specified network
folder.
12040009 Insufficient free space in the
designated network folder.
Message
Try the following:
• Check that the LAN cable of the scanner
• Check that the file server is working
• Contact a system administrator to check
Try the following:
• Contact a system administrator to check
• Check if the file attribute has been set as
To overwrite the existing file, on the
"Save" screen, set "Overwrite old files?" as
"Yes", and try again.
Try again later.
Re-enter the user name and password.
Check that the system network is function-
ing normally by performing a ping test
from another machine in the network, other
than the server with network folder. If the
system network is not operating correctly,
refer to
name" (page 300)
Try the following:
• Select a different network folder.
• Wait a short time, then try again.
Ensure the free space requirements are
met, and try again.
Network Scanner fi-6000NS Operator's Guide
Action
and file server is connected properly.
properly.
that the scanner IP address and network
folder settings are correct.
"6.3 Network Connection
Troubleshooting" (page 290)
whether or not access to the network
folder is permitted for the currently
logged in user or authenticated user.
hidden.
"Failure to connect to a server by
for further solutions.
C
387