Fujitsu 6000NS - fi - Document Scanner Operator's Manual page 335

Problem
The "Keyboard After turning the scanner off, was the
error or not key- power turned back on again immedi-
board present" mes- ately?
sage is shown on
the screen, the
scanner does not
startup.
Input field entry Has the input field been selected?
entered via the key-
board does not
appear on the
screen.
Saving is not possi- Does the length of the "Save As"
ble after pressing folder path (folder path plus file
[Save] on the [File name) exceed 259 characters?
Download] screen.
Status screen stops Is there enough free space in the
at "Printing scan
drive on which the spool folder for
data to ...".
the print server exists?
No response from Has the [Download], [Get CSV] or
[Backup] button been selected?
pressing tab or
enter key after a file
download operation
has been selected
via the network
interface or the
download process
does not start.
Check item
Network Scanner fi-6000NS Operator's Guide
6.4 Other Troubleshooting
Suggestion
Disconnect the AC cable from the scan-
ner, wait at least ten seconds, then reat-
tach the cable and turn the power back on
again. If the problem persists, contact
your FUJITSU scanner dealer or an
authorized FUJITSU scanner service pro-
vider.
Select the input field and try again.
Press the [Cancel] button and try again.
To use the touch panel, touch the input
field directly and try again.
Select a "Save As" folder that respects
the limit.
Make sure that there is enough space in
the drive.
Try pressing a different tab or button on
the screen.
6
307