Setting The Information Output Level - Fujitsu 6000NS - fi - Document Scanner Operator's Manual

3.9.4 Setting the Information Output Level

1. Select the [Maintenance] tab on the top menu.
2. Select the [Technical Support] tab on the left side menu.
⇒
The "Technical Support" screen appears.
3. Enter the desired information output level.
The default level is "1".
Increasing the value of the output level increases the detail of information collected, but
slows down processing. Set the level requested by your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
4. Press the [Set] button.
⇒
The information output level is set.
ATTENTION
164
If the "Information Output Level" is set to "5", the output data may
contain private user information such as e-mail addresses, so care
should be taken when managing such data.