Table of Contents
Advertisement
Screen
Scanner Name
330
Message
Scanner name contains invalid charac-
ters.
Scanner name has not been entered.
Specified scanner name is already
being used.
The new settings will be enabled after
the system has been restarted. Do you
wish to restart the system now or
later?
Now: Restart the system immediately.
Net-login will not be possible until the
restart completes.
Later: The system will be restarted and
the settings enabled when you logout.
Cancel: Cancel the new settings.
Action
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
"/\ [ ] : | < > + = ; , ?
Enter a scanner name.
Enter a different scanner name.
Press the [Now] button to cause
the system to restart immediately.
Press the [Later] button to delay
the system restart until other set-
tings are done.
Press the [Cancel] button to cancel
the new settings.
Advertisement
Table of Contents
Troubleshooting
