Enabling Call Forward (All); Using The Phone; Using Star Codes - Cisco 7912 - TEKELEC Manual

Call Forward (All Calls)

Enabling Call Forward (All)

Using the Phone

Using Star Codes

20 System Telephone Features
NOTE: If an incoming call is marked "Urgent", then the call will not be forwarded.
Calls forwarded to an external number (7 or more digits) that are unanswered will
roll over to voice mail (if available) at that number. Calls forwarded to an internal
number (4-digit to 6-digit extension) that are unanswered will roll over to voice mail
(if available) for the called party (not the forwarding destination).
External forwarding must be supported by your system for external numbers to be
accepted. Be sure to include the access code for an outside line and the area code,
if necessary, with the external number. Up to 20 digits may be entered.
1. Press the CFwdAll button. The display shows an icon followed by *Forward.
2. Enter the number to which you want to forward all calls. Be sure to enter the
number exactly as you would if you were to call that number. Include the area
code, if necessary. The display shows the number as it is entered.
3. To forward your calls, do one of the following to hang up the phone:
•
Press the EndCall softkey
•
Pickup and replace the handset.
4. Call forward (all) is enabled and the display shows "Forwarded to xxxx".
NOTE: The display will show the available options as the prompts are played. Depending
on available space on the display, the final entry (usually * for re-enter or exit) may
not appear completely.
1. Press 72* on the telephone keypad.
•
If you do not have a previously configured forward number, you will be
instructed to enter a forwarding number and press #.
•
If you previously configured a forwarding number, you will be instructed
to do one of the following:
•
Press 1 to enable forwarding. Go to step 8.
•
Press 2 to change the current forwarding number. Go to step 2.
2. Enter the number to which you want to forward all your calls. Be sure to enter
the number exactly as you would if you were to call that number. Include the
area code, if necessary. The display shows the number as it is entered.
3. Press #.
Cisco 7912 Telephone User Guide
620-05600350