Dialing In Too Early; Entering An Incorrect Id - Cisco 7912 - TEKELEC Manual

Dialing In Too Early

Entering an Incorrect ID

Cisco 7912 Telephone User Guide
620-05600350
When...
The conference
reservation state changes
from Active to Ends Soon.
Another participant joins
the conference.
You are the moderator.
The Start Soon
announcement was playing
when silence was started.
The conference bridge
state changes for some
reason.
If you dial the Meet-Me Conferencing number more than five minutes prior to the
scheduled conference call time, you will hear the following message and the
system will then disconnect:
"Your conference is not scheduled to start until (time) on (day, date). Please
call back at that time."
If you enter the wrong Guest or Moderator ID, the system informs you the
conference you wish to join could not be found and prompts you to press 1 to re-
enter the conference ID or press the * key to end the call.
If you pressed 1, do the following:
1. Enter the ID of the conference you wish to join.
2. Press the # key.
And if...
You are the moderator and
only caller connected to the
conference.
You were listening to the
First Caller announcement
when silence was started.
You perform any floor
control operation.
The moderator mutes or
unmutes you.
N/A
System Telephone Features
Joining a Meet-Me Conference
Then
You hear the Ends Soon
announcement.
You will be connected to
the conference.
You will be prompted with
the appropriate
announcement and
connected to the
appropriate announcement
based on the conference
state.
You will hear the Starts
Soon announcement.
You will hear the Starts
Soon, First Caller or Ends
Soon announcement
depending on the
conference reservation
state.
37