Ip Address/Phone Number Announcement; Changing The Extension Number - Cisco 7912 - TEKELEC Manual

IP Address/Phone Number Announcement

Changing the Extension Number

Cisco 7912 Telephone User Guide
620-05600350
To assign your phone number:
1. Take the phone off-hook.
2. Enter your complete telephone number and press #.
NOTE: To assign the phone to a non-DID number, enter the 10-digit main phone number,
then press *, enter the 4-digit non-DID extension, and then press #. Example:
9725551200*1201#
3. Enter your password and press #.
NOTE: You are not allowed to enter your phone number as your password.
4. Hang up the phone.
5. Wait for the phone to reboot.
6. When your telephone indicates that it is back online, you can use the phone.
NOTE: If you accidentally press more than one line button and have the Phone
Configurator active on multiple lines, finish the assignment process on one of the
lines. Any additional active calls to the Phone Configurator are on hold. When the
phone becomes active, disconnect the held call.
The IP address and phone number announcement feature of the Phone
Configurator function allows dialing an extension to hear the IP address or phone
number of the phone. This is especially useful in conference rooms with analog
speaker phones or at other locations with an analog phone where the phone
number is unknown.
•
To hear the phone number, dial 585.
•
To hear the IP address assigned to a phone, dial 586.
NOTE: These access codes are the default access codes for the system and your access
codes may be different. Check with the system administrator for the correct
access codes if the default codes do not work.
The extension number assigned to a phone may be changed using Phone
Configurator. To change the extension number, dial 588 and follow the instructions.
IP Address/Phone Number Announcement
System Telephone Features 45